Mold Remediation in Littleton, CO
We remove mold safely and fix the moisture behind it. Our crews contain the work area, filter the air with HEPA equipment, remove affected materials and dry the structure. We serve Littleton, Highlands Ranch, Centennial, Columbine, Ken Caryl and Roxborough.
- HEPA air filtration
- Full containment
- Moisture-source repair
- Documented results
One specialty, done properly
We do not split our attention across other trades. Every job follows the same careful sequence, and you always know what is happening and why.
Containment comes first
Before anything is removed, we seal the work area and run negative air so disturbed spores stay where they belong. The rest of your home stays protected throughout the job.
We chase the moisture
Mold returns if the water problem stays. We trace the likely source, including leaks behind water damage, and tell you what needs repair.
Clear documentation
A written scope up front and notes with photos at the end.
Independent testing friendly
We do not test, so any clearance sampling stays impartial.
Local to Littleton
We know the homes, the weather and the neighborhoods across all 13 ZIP codes.
Mold remediation for every part of the home
Pick the situation that matches yours, or call and we will help you figure it out.
Core mold services
The main ways we remove mold and clean up after it.
Emergency Mold Removal
Safe, contained removal of mold and affected materials, plus drying and moisture-source guidance.
Learn moreEmergency Black Mold Removal
Safe removal of dark, greenish-black mold from walls, ceilings and framing.
Learn moreEmergency Mildew Removal
Removal of mildew from walls, ceilings, fabrics and framing, with the humidity problem behind it.
Learn moreEmergency Mold Treatment
What mold treatment really involves: removal, cleaning, drying and moisture-source guidance.
Learn moreEmergency Mold Cleaning
Careful HEPA cleaning of mold on surfaces that can be saved, with removal where cleaning is not enough.
Learn moreEmergency Mold Odor Removal
Remove musty smells by finding and removing the mold and moisture that cause them.
Learn moreBy area of the home
Mold in a specific room or part of the structure.
Emergency Basement Mold Removal
Remediation for finished and unfinished basements, walkouts and window wells.
Learn moreEmergency Attic Mold Removal
Remediation for roof-deck, insulation and framing mold caused by leaks or poor venting.
Learn moreEmergency Crawl Space Mold Removal
Cleanup of mold on joists, subfloor and insulation in crawl spaces.
Learn moreEmergency Bathroom Mold Removal
Remediation for mold behind tile, under vanities and around tubs and showers.
Learn moreEmergency HVAC Mold Removal
Addressing mold on HVAC components and the moisture sources that cause it.
Learn moreEmergency Wall Mold Removal
Mold on or inside walls: drywall, plaster, paneling and the cavity behind them.
Learn moreEmergency Ceiling Mold Removal
Mold on ceilings from roof leaks, bathroom steam, upstairs plumbing and condensation.
Learn moreEmergency Floor Mold Removal
Mold on flooring, underlayment and subfloor: wood, laminate, vinyl, tile and slab edges.
Learn moreBy material
Mold on carpet, wood and concrete needs different handling.
Emergency Carpet Mold Removal
Removal of mold-affected carpet and pad, with cleaning and drying of the floor below.
Learn moreEmergency Wood Mold Removal
Mold on framing, joists, roof sheathing, subfloor and trim, cleaned or replaced as needed.
Learn moreEmergency Concrete Mold Removal
Mold on concrete floors, foundation walls, block and garage slabs.
Learn moreMoisture, water and prevention
Dealing with the water behind the mold and keeping it from returning.
Emergency Mold After Water Damage & Flooding
Mold remediation after floods, pipe bursts, roof leaks, sewer backups and appliance failures.
Learn moreEmergency Mold & Dampness Removal
Remove mold from damp walls, basements and crawl spaces and find what keeps them damp.
Learn moreMoisture Control
Drying, dehumidification and moisture-source guidance so wet materials do not turn into mold.
Learn moreMold Prevention
Practical steps and moisture-source guidance to stop mold from returning after cleanup.
Learn morePost-Remediation Clearance
What clearance means, who does it and how we prepare your home for it.
Learn moreKeeping spores out of the rest of your home
Disturbing mold without protection can spread it. We isolate the affected area with sealed barriers and run a HEPA air machine that pulls air out of the work area, so pressure stays lower inside than outside.
- Sealed barriers around the affected area
- HEPA filtration running during and after the work
- Materials bagged and removed without crossing clean rooms
Six steps from first call to final drying
The same sequence on every job, so you always know what happens next.
Inspect and scope
We find the mold, trace the moisture source and write a clear scope of work.
Contain
Sealed barriers and negative air keep spores inside the work area.
Remove
Contaminated porous materials are removed and bagged for disposal.
Clean
Surfaces are HEPA vacuumed and damp wiped.
Dry
We run drying equipment and check moisture levels before closing up.
Document
You receive notes and photos of the work, ready for any independent clearance.
Serving Littleton and every neighborhood nearby
Six communities cover all 13 ZIP codes. Find yours below.
Littleton
Downtown Littleton and the city core
Southeast Littleton and Centennial
Southeast Littleton, Centennial and the Greenwood Village border
Columbine, Columbine Valley and Bow Mar
Columbine and the Columbine neighborhoods, Columbine Valley, Bow Mar
Ken Caryl
Ken Caryl Ranch, Ken Caryl Valley, North Ranch and TrailMark
Highlands Ranch
Highlands Ranch, including Highlands Ranch West and Southridge
Roxborough
Roxborough Park, Roxborough Village, Stonehenge at Roxborough, Ravenna and Sterling Ranch
Mold remediation in your neighborhood
Every neighborhood below has its own page with local causes of mold and the services available.
Visit our Highlands Ranch office
We are located at 1745 Shea Center Dr, 3rd Floor, Highlands Ranch, CO 80129, and we serve homes across Littleton, Highlands Ranch, Centennial, Columbine, Ken Caryl and Roxborough.
Mold remediation questions, answered
Still unsure? Call us and talk it through with a person.
(303) 555-0142What is the difference between mold remediation and mold removal?
Remediation is the full controlled process: containment, removal of contaminated materials, HEPA filtration, cleaning, drying and fixing the moisture cause. Removal is one step within it.
Do you offer mold testing?
No. We perform mold remediation only. If you want testing or clearance sampling, an independent assessor keeps the results impartial.
Why does mold grow in dry Colorado homes?
Mold depends on moisture inside the building, not outdoor humidity. Roof leaks, window wells, plumbing leaks, ice dams and humidifiers create local wet spots.
Which areas and ZIP codes do you serve?
We serve Littleton and nearby communities in 80120, 80121, 80122, 80123, 80125, 80126, 80127, 80128, 80129, 80130, 80160, 80165, 80166. See the service areas page for neighborhoods.
Can I remove mold myself?
Often, for small areas. The EPA says mold areas smaller than about 10 square feet can usually be handled by the homeowner. Larger areas, mold in drywall or flood damage need a professional. Read our guide on whether you can remove mold yourself.
What kills mold permanently?
Nothing does while moisture remains. Lasting results come from removing growth and fixing the moisture source, because the EPA says dead mold can still cause allergic reactions. See what kills mold permanently.
How much does mold removal cost?
It depends on the area, materials, access, hidden growth and containment needed. We give a written estimate after a visit. See what affects mold removal cost.
How do I get an estimate?
Call us or send the quote form. We will schedule a visit and give you a written scope of work.
Straight answers on mold in Colorado homes
What Kills Mold Permanently? Facts vs Myths
Why "killing" mold is not enough, what actually removes it and why it comes back.
Read the guideCan You Remove Mold Yourself? DIY vs Pro
The EPA 10 square foot guideline, what to wear, and when DIY mold cleanup is the wrong call.
Read the guideWhat Affects Mold Removal Cost?
The factors that drive mold remediation cost, what a written scope should include and how to compare quotes.
Read the guideHow to Stop Mold From Coming Back
A moisture-first plan: humidity, ventilation, leaks and drainage, with the numbers the EPA recommends.
Read the guideHow to Choose a Mold Remediation Company
Questions to ask, what a written scope should say and why testing and removal should be separate.
Read the guideHow Mold Remediation Works, Step by Step
The full remediation process from inspection to drying, in plain language.
Read the guideFound mold? Do not wait for it to spread.
Call (303) 555-0142 or request an estimate today.